Keeping Your Mag Happy
There really is not much to do. About all that you need to do is add a little oil to the to holes on the valve where the manual instructs you to oil. If you are a bit more meticulous like I am, then you can take the whole maker and valve apart. Clean it all off with denatured alcohol to get the dirty grimy oil off and then re-oil the parts and assemble the marker.

There are a few things that are wise to have laying around in case you need them. Though I suggest you have at least 1 of every o-ring and minor part for your Mag as a backup there parts that I notice are most often needed to be replaced are:

  • The Clear RT bolt bumper (not the blue bumper on Classic Valves)
  • The Bolt Spring
  • The new Angel Detents us on the ULE Bodies

With the exception of the RT bumper, the other 2 parts mentioned are very rarely needed to be replaced. Heck almost nothing needs to be replaced on the marker often but those are the only ones I notice myself replacing more often than once a year.
This site and all images property of Zak Vetter 2008 All rights reserved